Catalogue
Web V6 Manufacturer
Search:
Page 1 of 2
Next
Group:
-->
ELS1065
FMTR-2713 REPEATER 12VDC,1 WATT, WITHOUT CASE
Ex GST:
402.00
Inc GST:
442.20
1 WATT REPEATER 27MHz, 12V, NO CASE

ELS1065 (FMTR-2713) One Watt Repeater (27MHz)
The ELS1065 is a 27MHz repeater with a highly sensitive receiver and 1 watt transmitter, able to increase the range of a transmitted signal to 3km and can be used with any of the Airkey transmitters. This micro-controller comes as a printed circuit board assembly which enables customers to integrate the repeater into their own product with ease. PCB assembly only. SO239 socket required.

  • Insertion: 28-pin IC socket
  • Carrier frequency tolerance: Crystal controller, 30 parts/million
  • Supply voltage: 11-13.6VDC, screw-type terminal block
  • Current: 25mA
  • RF power output: 1 Watt into 50 Ohms at 13.6VDC
  • Ditigal coding system: 12-way coding switch
  • Operating range: Up to 3km depending on antenna and installation
  • Dimension (mm): 150 70 10


1 WATT REPEATER 27MHz, 12V, NO CASE

ELS1065 (FMTR-2713) One Watt Repeater (27MHz)
The ELS1065 is a 27MHz repeater with a highly sensitive receiver and 1 watt transmitter, able to increase the range of a transmitted signal to 3km and can be used with any of the Airkey transmitters. This micro-controller comes as a printed circuit board assembly which enables customers to integrate the repeater into their own product with ease. PCB assembly only. SO239 socket required.

  • Insertion: 28-pin IC socket
  • Carrier frequency tolerance: Crystal controller, 30 parts/million
  • Supply voltage: 11-13.6VDC, screw-type terminal block
  • Current: 25mA
  • RF power output: 1 Watt into 50 Ohms at 13.6VDC
  • Ditigal coding system: 12-way coding switch
  • Operating range: Up to 3km depending on antenna and installation
  • Dimension (mm): 150 70 10


ELS1135
FMR-212 1-CHANNEL FM 10-28V AC/DC RECEIVER, 240V AC/DC 5AMP RELAY O/PUT
Ex GST:
155.00
Inc GST:
170.50
ELS1135 (FMR-212) 1-CHANNEL FM RECEIVER 27MHz, NO CASE (PCB)

Single Channel FM Receiver with One Relay Output
The FMR-212 series is a crystal-controlled single channel receivers consisting of receiving, decoding and relay-output section. A specially designed micro controller used in the decoder section, ensures operation at low supply voltage associated with very low power drain.


  • Power supply: 10V - 28V AC/DC
  • Current consumption: 15mA standby at 12VDC
  • IF frequency: 455kHz
  • Selectivity: at least -40dB at about 10kHz
  • Output: Change over relay output, rated at 5A/ 240V
  • Connections: 6-way screw-type terminal block
  • Decoding system: Onboard 12-way coding switch (4096 digital channels)
  • Dimensions (mm): 96 70 20


ELS1135 (FMR-212) 1-CHANNEL FM RECEIVER 27MHz, NO CASE (PCB)

Single Channel FM Receiver with One Relay Output
The FMR-212 series is a crystal-controlled single channel receivers consisting of receiving, decoding and relay-output section. A specially designed micro controller used in the decoder section, ensures operation at low supply voltage associated with very low power drain.


  • Power supply: 10V - 28V AC/DC
  • Current consumption: 15mA standby at 12VDC
  • IF frequency: 455kHz
  • Selectivity: at least -40dB at about 10kHz
  • Output: Change over relay output, rated at 5A/ 240V
  • Connections: 6-way screw-type terminal block
  • Decoding system: Onboard 12-way coding switch (4096 digital channels)
  • Dimensions (mm): 96 70 20


ELS1145
FMR-212E 1 CHANNEL FM RECEIVER, 27MHZ, IN PLASTIC CASE
Ex GST:
198.00
Inc GST:
217.80
1-CHANNEL FM RECEIVER 27MHz, IN PLASTIC CASE

ELS1145 (FMR-212E)
Single Channel FM Receivers with One Relay Output
The FMR-212 series is a crystal-controlled single channel receivers consisting of receiving, decoding and relay-output section. A specially designed micro controller used in the decoder section, ensures operation at low supply voltage associated with very low power drain.


  • Power supply: 10V - 28V AC/DC
  • Current consumption: 15mA standby at 12VDC
  • IF frequency: 455kHz
  • Selectivity: at least -40dB at about 10kHz
  • Output: Change over relay output, rated at 5A/ 240V
  • Connections: 6-way screw-type terminal block
  • Decoding system: Onboard 12-way coding switch (4096 digital channels)
  • Dimensions (mm): 96 70 20


1-CHANNEL FM RECEIVER 27MHz, IN PLASTIC CASE

ELS1145 (FMR-212E)
Single Channel FM Receivers with One Relay Output
The FMR-212 series is a crystal-controlled single channel receivers consisting of receiving, decoding and relay-output section. A specially designed micro controller used in the decoder section, ensures operation at low supply voltage associated with very low power drain.


  • Power supply: 10V - 28V AC/DC
  • Current consumption: 15mA standby at 12VDC
  • IF frequency: 455kHz
  • Selectivity: at least -40dB at about 10kHz
  • Output: Change over relay output, rated at 5A/ 240V
  • Connections: 6-way screw-type terminal block
  • Decoding system: Onboard 12-way coding switch (4096 digital channels)
  • Dimensions (mm): 96 70 20


ELS1155
FMR-212T 1-CHANNEL FM RECEIVER, DELAY TIMER, NO CASE
Ex GST:
Inc GST:
1-CHANNEL FM RECEIVER 27MHz, WITH DELAY TIMER, NO CASE (PCB)

ELS1155 (FMR-212T)
Single Channel FM Receivers with One Relay Output
The FMR-212 series is a crystal-controlled single channel receivers consisting of receiving, decoding and relay-output section. A specially designed micro controller used in the decoder section, ensures operation at low supply voltage associated with very low power drain.

  • Power supply: 10V - 28V AC/DC
  • Current consumption: 15mA standby at 12VDC
  • IF frequency: 455kHz
  • Selectivity: at least -40dB at about 10kHz
  • Output: Change over relay output, rated at 5A/ 240V
  • Connections: 6-way screw-type terminal block
  • Decoding system: Onboard 12-way coding switch (4096 digital channels)
  • Dimensions (mm): 96 70 20


1-CHANNEL FM RECEIVER 27MHz, WITH DELAY TIMER, NO CASE (PCB)

ELS1155 (FMR-212T)
Single Channel FM Receivers with One Relay Output
The FMR-212 series is a crystal-controlled single channel receivers consisting of receiving, decoding and relay-output section. A specially designed micro controller used in the decoder section, ensures operation at low supply voltage associated with very low power drain.

  • Power supply: 10V - 28V AC/DC
  • Current consumption: 15mA standby at 12VDC
  • IF frequency: 455kHz
  • Selectivity: at least -40dB at about 10kHz
  • Output: Change over relay output, rated at 5A/ 240V
  • Connections: 6-way screw-type terminal block
  • Decoding system: Onboard 12-way coding switch (4096 digital channels)
  • Dimensions (mm): 96 70 20


ELS1160
FMR-202 2-CHANNEL RECEIVER, 2- RELAY OUTPUTS, NO CASE
Ex GST:
185.00
Inc GST:
203.50
2-CHANNEL RECEIVER TWO RELAY OUTPUTS 27MHz, NO CASE

ELS1160 (FMR-202)
Two Channel Receivers with Two Relay Outputs (27MHz)
The FMR-202 receiver is a digitally encoded, crystal-controlled two-channel receiver consistiting of receiving, decoding and relayoutput section. A specially designed micro processor is employed in the decoder section which ensures operation at low supply voltage associated with very low power drain. With or without plastic case.

  • Power supply: 11V-28V AC; 10V-28V AC
  • Current consumption: 15mA standby at 12VDC
  • Receiving frequency: 27.145MHz
  • IF frequency: 455kHz
  • Selectivity: at least -40dB at about 10kHz
  • Output: Two change over relay outputs, rated at 5A/ 240V
  • Connections: Two relays - 6-way screw-type terminal block
  • Decoding system: Onboard 12-way coding switch (4096 digital channels)
  • Dimensions (mm): 130 70 20


2-CHANNEL RECEIVER TWO RELAY OUTPUTS 27MHz, NO CASE

ELS1160 (FMR-202)
Two Channel Receivers with Two Relay Outputs (27MHz)
The FMR-202 receiver is a digitally encoded, crystal-controlled two-channel receiver consistiting of receiving, decoding and relayoutput section. A specially designed micro processor is employed in the decoder section which ensures operation at low supply voltage associated with very low power drain. With or without plastic case.

  • Power supply: 11V-28V AC; 10V-28V AC
  • Current consumption: 15mA standby at 12VDC
  • Receiving frequency: 27.145MHz
  • IF frequency: 455kHz
  • Selectivity: at least -40dB at about 10kHz
  • Output: Two change over relay outputs, rated at 5A/ 240V
  • Connections: Two relays - 6-way screw-type terminal block
  • Decoding system: Onboard 12-way coding switch (4096 digital channels)
  • Dimensions (mm): 130 70 20


Page 1 of 2
Next
Go to page: