FSH New Range of Mechanical Electro Magnetic Locks

This ultra compact, recently designed slimlined MEM (Mechanical Electro Magnetic) lock has been designed to replace a standard magnetic lock. Incorporating both magnetic and mechanical design principles to achieve a holding force of up to 680kgs. These locks also provide full monitoring with LSS, DSS and early warning security alarm indications.

Common Features

◆ Slimline design 75% smaller than a standard 600kg magnet
◆ High holding force up to 680kg and up to 70kg pre-load
◆ Dual-Voltage 12/24VDC Low power consumption 24VDC/140mA
◆ 5 year warranty
◆ Simple installation
◆ 4 hour fire rated
◆ Full monitoring Lock Status Sensor (LSS) and Door Status Sensor (DSS)
◆ Early Warning Alarm (EW)
◆ Anti Tamper Bracket (to protect the armarture plates fixing bolt)

Adjustable L & Z Bracket for inward opening doors

The MEM L&Z Bracket is designed to be used on inward opening doors and only with the MEM2400LED model. The MEM2400LP model cannot not be installed in this application

Adjustable L-Bracket for narrow header door frame

The Adjustable L-Bracket is used where there is not enough space to install the MEM device directly to the door frame header. The L-Bracket acts as an extension of the door frame. The Adjustable L-Bracket is also used in combination with the Glass-Door
Bracket “U-Profile” when the lock has to be installed onto a frameless glass header.

Glass-Door-Bracket “U-profile”

The Glass-Door-Bracket U-Profile is used to clamp-on the MEM lock as well as the armature plate to either a frameless glass door or a frameless glass header. As mentioned above, the adjustable L-Bracket has to be ordered separately and can be used on frameless glass headers. The product No.MEM2400UBG has one unit in
the box. Frameless glass door and frameless glass frame as one door element would require 2 units of MEM2400UBG as well as 1 unit Adjustable L-Bracket MEM2400L.

Glass-Door mounting “stick-on” with MEM2400 Anti-Tamper Bracket

The MEM 2400 Anti-Tamper Bracket comes with
the MEM 2400 lock as a standard fitting.
The bracket can be used for glass door “stick-on”
mounting. We recommend 3M self adhesive tape
(e.g. 4910VHB or equivalent) and FSH Dress
Plate AMAB4-BC.

For further information on the FSH range of Mechanical Electro Magnetic Locks contact Seadan Security on 1300 366 851 or email: seadan@seadan.com.au